New

AXI 22 AT D Plus

2 Input, 2 Output Dante Audio Interface - Decorator-Style Wallplate

Key Features

Two mic/line inputs on XLR connectors insert audio onto a Dante® network
Two line outputs on a rear panel captive screw connector extract audio from a Dante network
Dante audio networking provides a wide range of expansion capabilities
New Controllable via the Dante network
Studio grade 24-bit analog-to-digital and digital-to-analog converters selectable up to 96 kHz
Compatible with Extron WPD 100 Series wallplates
All Features

AXI 22 AT D Plus with Included White Decorator-Style Wallplate

AXI 22 AT D Plus - Cover Plate Removed Showing USB Configuration Port

AXI 22 AT D Plus with Included Black Decorator-Style Wallplate

AXI 22 AT D Plus and WPD 102 XLRM with Included White Decorator-Style Wallplate

AXI 22 AT D Plus and WPD 102 XLRM - Front and Back

AXI 22 AT D Plus and WPD 102 XLRM with Included Black Decorator-Style Wallplate

AXI 22 AT D Plus and WPD 102 XLRM - Kit Pieces

Image Gallery

Overview

The Extron AXI 22 AT D Plus is a single-gang decorator-style Dante® audio interface for integrating two mic/line sources onto a Dante-enabled audio system. It features two XLR audio inputs and switchable 48 volt phantom power for connecting and powering condenser microphones, and remote control via the network. The AXI 22 AT D Plus also features two line outputs for routing any two Dante channels from the network to the analog input of a destination device, or connecting into an optional secondary wallplate with two XLR outputs. The AXI 22 AT D Plus interfaces with any Dante-equipped audio processor, such as an Extron DMP 128 Plus AT, over a standard local area network, and can be powered through PoE. This allows a single network cable connection for bidirectional audio, control, and power from a central equipment rack.