| WC Pro 150 OCS |
|
| Sensors |
|---|
| Passive infrared (PIR) | 2 sensors |
| Front panel activity LEDs | 2 Red - passive infrared motion LEDs
Green - acoustic sensor/detection activity LED |
| Inactivity timer | Selectable range 1 seconds to 24 hours |
| Acoustic | 1 sensor |
| Coverage area | 400 square feet |
| Field of view | |
| Vertical | 24 degrees |
| Horizontal | 142 degrees |
| |  |
| | |
| | |
| |  |
|
| Memory |
|---|
| SDRAM | 1 GB |
| Flash | 8 GB |
|
| CEC |
|---|
| HDMI | 1 female HDMI Type A |
|
| Software |
|---|
| Configuration software | Global Configurator® Plus and Professional |
| Programming software | ControlScript® Deployment and ControlScript Extension for VS Code |
| Control apps | Extron Control |
| Resource management software | GlobalViewer® Enterprise |
| Utilities | Toolbelt, Embedded Web Page |
|
| Hardware user interface |
|---|
| Hardware | TouchLink® Pro touchpanels or Network Button Panels |
|
| Ethernet |
|---|
| Network interface controllers (NICs) | 1 LAN |
| Connector | 1 female RJ-45 connector |
| Data rate | 10/100Base-T, half/full duplex with autodetect |
| Protocols | ARP, DHCP, DNS, HTTP (redirect), HTTPS, ICMP, IEEE 802.1X, NTP, SFTP, SMTP, SNMP, SSH, TCP/IP, UDP/IP |
| Default settings | Link speed and duplex level = autodetected
IP address = 192.168.254.250
Subnet mask = 255.255.255.0
Gateway = 0.0.0.0
DHCP = off
DNS: 127.0.0.1 |
|
| Serial |
|---|
| Quantity/type | 1 bidirectional RS-232 |
| Connector | (1) 3.5 mm direct insertion captive screw connector, 3-pole |
| Baud rate and protocol | 300 to 115200 baud (9600 baud = default)
8 (default) or 7 data bits
1 (default) or 2 stop bits;
no parity (default), even, or odd parity |
| NOTE | Support software flow control. The default is no flow control |
|
| Pin configuration | Pin 1 = Tx, 2 = Rx, 3 = Gnd |
|
| Digital inputs/outputs |
|---|
| Number/type | 2 digital inputs/outputs (configurable) |
| Connector | (2) 3.5 mm captive screw connector, 3-pole |
| Digital inputs | |
| Input voltage range | 0-24 VDC |
| Input impedance | 12k ohms |
| Programmable pullup | 2k ohms to +5 VDC |
| Threshold low to high | >2.8 VDC |
| Threshold high to low | <2.0 VDC |
| Digital outputs | 250 mA sink from 24 VDC max |
|
| IR |
|---|
| Quantity/type | 1 programmable TTL level (0 to 5 V) infrared (carrier and non-carrier) |
| Connector | (1) 3.5 mm direct insertion captive screw connector, 2-pole |
| Pin configuration | Pin 1 = signal, 2 = Gnd |
| IR output carrier frequency | 30 kHz to 300 kHz |
|
| General |
|---|
| Power supply | Not included |
| Power input requirements | Power over Ethernet (PoE) (complies with PoE 802.3af, class 3) |
| Power consumption | |
| Device | 4.3 watts |
| Device and power supply | 6.2 watts |
| Ambient temperature/humidity | Storage: -40 to +158°F (-40 to +70°C) / 10% to 90%, noncondensing
Operating: +32 to +122°F (0 to +50°C) / 10% to 90%, noncondensing |
| Cooling | Convection, no vents |
| Thermal dissipation | |
| Device | 13.8 BTU/ hr |
| Device and power supply | 20.1 BTU/ hr |
| Mounting | Included bracket or universal female 1/4"- 20 mounting thread for use with optional mounting accessories (not provided) |
| Enclosure type | Plastic with metal |
| Enclosure dimensions | 0.89" H x 6.00" L x 2.01" D
(22.6 mm W x 152 mm L x 51.5 mm D)
Depth excludes connectors and mounting equipment/parts/bracket |
| |  |
| | |
| |  |
| Product weight | 0.53 lbs (0.24 g) |
| Regulatory compliance | CE, C-tick, c-UL, FCC Class A, ICES, RoHs, UL, WEEE |
| Product warranty | 3 years parts and labor |
| NOTE | Specifications are subject to change without notice. |
|
| (6210-D3) |