MVC 121 xi |
|
Audio system |
Gain | |
Balanced output | 0 dB |
Unbalanced output | -6 dB |
Frequency response | 20 Hz to 20 kHz, ±0.3 dB |
THD + Noise | <0.02%, 20 Hz to 20 kHz At maximum balanced output (unweighted) |
S/N | |
Analog Input to Analog Out | >100 dB, 20 Hz to 20 kHz
At maximum balanced output (unweighted) |
Crosstalk | <-90 dB @ 20 Hz to 20 kHz, fully loaded |
Calibration reference | |
A/D | 1 kHz, +4.0 dBu sine (1.228 Vrms) = -17 dBFS
|
D/A | 1 kHz, -17 dBFS sine = +4.0 dBu (1.228 Vrms) |
|
Audio input |
Mic/Line Inputs (1-2) | |
Microphone inputs | 2 mono, mic/line, balanced/unbalanced |
Connectors | (1) 6-pole, 3.5 mm captive screw, dual-mono, balanced/unbalanced |
Impedance | >10k ohms balanced or unbalanced |
Nominal level | +4 dBu when level is set to 0 dB gain; adjustable from −60 dBu to +4 |
Maximum level | +21 dBu (at rated THD + N) when input gain is set to 0 dB |
Equivalent input noise | <-120 dBV (1 µVrms) (at 40 dB input gain) |
CMRR | >65 dB typical |
Input gain adjustment | -18 dB to +60 dB in 0.1 dB steps, adjustable per input |
Phantom power | +48 VDC, (enabled or disabled via software and the front panel) |
Line Level Input | |
Number/signal type | 1 stereo, line-level, balanced/unbalanced |
Connectors | (1) 6-pole, 3.5 mm captive screw, stereo, balanced/unbalanced |
Impedance | >10k ohms balanced/unbalanced |
Nominal level | +4 dBu when level is set to 0 dB gain; adjustable from −60 dBu to +4 dBu |
Maximum level | +21 dBu (at rated THD + N) when input gain is set to 0 dB |
Equivalent input noise | <-120 dBV (1 µVrms) at 40 dB input gain |
CMRR | >60 dB typical |
Input gain adjustment | -18 dB to +24 dB in 0.1 dB steps, adjustable per input |
|
Audio Output (Variable L/R, Fixed L/R) |
Number/signal type | 2 stereo, line-level, balanced/unbalanced |
Connectors | (2) 6-pole, 3.5 mm captive screw, stereo, balanced/unbalanced |
Impedance | 100 ohms with balanced lines (or 50 ohms with unbalanced lines) |
Gain error | ±0.1 dB channel to channel |
Maximum level (Hi-Z) | >+21 dBu balanced, >+15 dBu unbalanced |
Output Attenuation (VARIABLE) | -100 dB to 0 dB (controlled in 0.1 dB steps) |
Output Gain (FIXED) | -24 dB to +12 dB (controlled in 0.1 dB steps) |
|
Audio processing |
A/D, D/A conversion | 24-bit / 48 kHz PCM |
NOTE | 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu; All nominal levels are at ±10 %. |
|
|
External Control (RS-232) |
Serial control port | (1) 3-pole, 3.5 mm captive screw |
Protocol and baud rate | Bidirectional RS-232: 38400 baud, 8 data bits, 1 stop bit, no parity |
Pin configuration | Pin-1 = “Tx”, Pin-2 = “Rx”, Pin-3 = “G” |
USB control port | 1 front panel USB-C (female) |
Protocol | USB 2.0, low speed |
Control/Configuration program | Extron DSP Configurator Pro for Microsoft Windows 10/11® |
API | Extron Simple Instruction Set (SIS™) |
|
Digital Logic Inputs |
Digital I/O ports | (1) 6-pole, 3.5mm captive screw |
Pin configuration | Pin-1 = Read, Pin-2 = Read, Pin-3 = Read, Pin-4 = Read, Pin-5 = +5 VDC @ <= 150mA, Pin-6 = GND |
Programmable pullup resistor | 3k ohm |
Over-Current protection | Pin-5 voltage output provides over-current and short circuit protection which resets after power-cycling |
|
General |
External power supply | |
Part number | 70-1175-01 |
Model | PS 1205 C |
Input (AC) | 100-240 VAC, 50-60 Hz 0.25 A |
Output (DC) | 12 VDC, 0.5 A, 6 Watts |
Power input requirement | 12 VDC / 0.46 A |
Power consumption |
Device | 4.2 watts |
Device and power supply | 5.2 watts |
Thermal dissipation |
Device | 13.0 BTU/hr |
Device and power supply | 16.6 BTU/hr |
Cooling method | Passive, unventilated |
Environmental | |
Ambient temperature/humidity | Storage: -40° to +158°F (-40° to +70°C) / 10% to 90% (noncondensing)
Operating: +32° to +122°F (0° to +50°C) / 10% to 90% (noncondensing) |
Mounting options | |
Rack mount | Yes, with optional 1U rack shelf |
Furniture mount | Yes, with optional mini under-desk mounting kit |
Physical properties | |
Enclosure type | Metal |
Enclosure dimensions | 1.7" H x 4.3" W x 3.0" D (1U high, quarter rack wide)
(43 mm H x 109 mm W x 76 mm D)
(Depth excludes connectors and knobs) |
Product weight | 0.5 lbs (0.2 kg) |
Regulatory compliance | |
Safety | CE, c-UL, UL |
EMI/EMC | CE, C-Tick, FCC Class A, ICES, VCCI |
Environmental | Complies with the appropriate requirements of RoHS, WEEE |
Warranty | |
Device | 3 years parts and labor |
Everlast power supply warranty | 7 years parts and labor |
NOTE | All nominal levels are at ±10%. |
|
NOTE | Specifications are subject to change without notice. |
|
(6257-D2) |