MTP T 15HD A Retired

MTP Twisted Pair Transmitter for VGA and Audio with EDID Minder®

Key Features

Transmits high resolution video and summed mono audio signals over a single CAT 5-type cable
EDID Minder® automatically manages EDID communication between connected devices
Supports RGBHV, RGBS, RGsB, RsGsBs, component video, S-video, and composite video
Compatible with HDTV component video, bi-level or tri-level sync
Pre-peaking circuit for optimizing video signal on long cable runs
Rack-mountable, 1U, quarter rack width metal enclosure

Model	Version Description	Part #
MTP T 15HD A	Transmitter	60-1282-01	Retired

This product has been retired.

The Extron MTP T 15HD A Twisted Pair Transmitter with EDID Minder® sends high resolution video and audio signals to a compatible MTP receiver. The MTP T 15HD A features EDID Minder, which automatically manages EDID communication to ensure that the source powers up properly and reliably outputs content for display. It accepts computer-video, HD and standard definition video, and audio inputs on female 15-pin HD connectors and 3.5 mm stereo audio jacks. The video and summed mono audio signals are transmitted over a single CAT 5-type cable to a compatible twisted pair receiver. The MTP T 15HD A also features a local monitor output for systems that require a local display.

The MTP 15HD A Series non-CAT 7 models can be used with any CAT 5-type twisted pair cable or with Extron's Enhanced Skew-Free™ AV UTP Cable for cable runs of 600 feet (185 meters) or more with XGA signals, and 450 feet (135 meters) or more with UXGA signals

Extron MTP 15HD A transmitters and receivers precisely optimize image quality for various CAT 5-type cable lengths using adjustment controls on both the transmitter and receiver. The transmitters feature a pre-peaking switch that provides additional compensation at the front end for the longest cable runs. The receivers offer continuously variable gain and peaking controls, allowing users to dial in the exact amount of gain and peaking required for each unique cable run.

MTP 15HD A Series transmitters, receivers, and switchers are compatible with resolutions up to 1920 x 1200 and are ideal for such applications as large training facilities, museums, airports, movie theaters, and hotels. These products are well suited for any application that requires a cost-effective solution for sending high resolution video with audio signals long distances over CAT 5-type cable.

The compact MTP 15HD A Series is designed for easy integration into new and existing AV environments. The entire family of Extron MTP 15HD products sets the price/performance standard for audio/video twisted pair technology. The MTP 15HD Series is a complete twisted pair system including transmitters, receivers, and switchers, providing the ability to send, route, and distribute high resolution video, audio, and control signals. The MTP 15HD A Series is ideal for systems where high resolution video signals must be transmitted long distances to a display where conduit space is limited or for audio/video systems where cabling might be exposed or visible.

Features

Input: Female 15-pin HD

Output: Female RJ-45 connector

Transmits high resolution video and summed mono audio signals over a single CAT 5-type cable

EDID Minder® automatically manages EDID communication between connected devices

Supports RGBHV, RGBS, RGsB, RsGsBs, component video, S-video, and composite video

Compatible with HDTV component video, bi-level or tri-level sync

Pre-peaking circuit for optimizing video signal on long cable runs

Rack-mountable, 1U, quarter rack width metal enclosure

External Extron Everlast™ power supply included, replacement part #70-1174-01 — Provides worldwide power compatibility with high‑demonstrated reliability and low power consumption

Extron Everlast Power Supply is covered by a 7‑year parts and labor warranty

COMPATIBLE RECEIVERS
	MTP RL 15HD A & MTP RL 15HD A SEQ	MTP Twisted Pair Receivers for VGA and Audio

COMPATIBLE RECEIVERS

MTP RL 15HD A & MTP RL 15HD A SEQ

MTP Twisted Pair Receivers for VGA and Audio

OPTIONAL ACCESSORIES
	RSF 123	Rack Shelf Kit for 3.5" Deep Products
	RSU 126	Universal Rack Shelf Kit for 6" Deep Products
	MBU 123	Low-Profile Mount Kit for 1/8, 1/4, and 1/2 Rack Width Products
	PMK 100	Pole Mount Kit for One 1/4 Rack Width Product
	ZipClip 200	Mounting Kit for 1/8 and 1/4 Rack Width Products
	ZipClip 100	Mounting Kit for PS Series Power Supplies

OPTIONAL ACCESSORIES

RSF 123

Rack Shelf Kit for 3.5" Deep Products

RSU 126

Universal Rack Shelf Kit for 6" Deep Products

MBU 123

Low-Profile Mount Kit for 1/8, 1/4, and 1/2 Rack Width Products

PMK 100

Pole Mount Kit for One 1/4 Rack Width Product

ZipClip 200

Mounting Kit for 1/8 and 1/4 Rack Width Products

ZipClip 100

Mounting Kit for PS Series Power Supplies

SIMILAR PRODUCTS
	MTP R AV & MTP R AV RCA	MTP Twisted Pair Composite Video and Audio Receivers
	MTP RL 15HD A & MTP RL 15HD A SEQ	MTP Twisted Pair Receivers for VGA and Audio
	MTP T AV & MTP T AV RCA	MTP Twisted Pair Composite Video and Audio Transmitters

SIMILAR PRODUCTS

MTP R AV & MTP R AV RCA

MTP Twisted Pair Composite Video and Audio Receivers

MTP RL 15HD A & MTP RL 15HD A SEQ

MTP Twisted Pair Receivers for VGA and Audio

MTP T AV & MTP T AV RCA

MTP Twisted Pair Composite Video and Audio Transmitters

Specifications

MTP 15HD A Series Combo

Video

Gain

Unity

Number/signal type

1 set of proprietary analog signals

Connectors

MTP R 15HD RSA D

1 female RJ-45 on a pigtail

All other models

1 female RJ-45

Video input and loop through — transmitters

Number/signal type

MTP T 15HD A, MTP C7 T 15HD A

1 analog RGBHV, RGBS, RGsB, RsGsBs, component video, S-video, or composite video
1 buffered RGBHV, RGBS, RGsB, RsGsBs local monitor loop through (includes ID bits)

MTP T 15HD A AAP, MTP T 15HD A D, MTP T 15HD A WM

1 analog RGBHV, RGBS, RGsB, RsGsBs, component video, S-video, or composite video

Connectors

MTP T 15HD A, MTP C7 T 15HD A

2 female 15-pin HD

All other transmitters

1 female 15-pin HD

Nominal level

1 Vp-p for Y of component video and
S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video

Minimum/maximum levels

0.3 V to 1.45 Vp-p

Impedance

75 ohms

Horizontal frequency

15 kHz to 130 kHz

Vertical frequency

30 Hz to 150 Hz

Return loss

<-30 dB @ 5 MHz

DC offset (max. allowable)

250 mV

Video output — receivers (MTP RL 15HD A, MTP RL 15HD A SEQ, MTP R 15HD RSA D, MTP 1500RL 15HD A SEQ. MTP C7 RL 15HD A)

Number/signal type

MTP R 15HD RSA D

1 analog VGA-UXGA RGBHV, RGBS, RGsB, RsGsBs, HD component video, component video, S-video, or composite video

All other receivers

1 set of proprietary analog signals
1 analog RGBHV, RGBS, RGsB, RsGsBs, component video (bi-/tri-level sync), S-video, or composite video

Connectors

MTP R 15HD RSA D

1 female 15-pin HD

All other receivers

1 female RJ-45
1 female 15-pin HD

Nominal level

1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video

Minimum/maximum levels

0.3 V to 1.45 Vp-p

Impedance

75 ohms

Return loss

<-30 dB @ 5 MHz

DC offset

MTP R 15HD RSA D

<±20 mV with input at 0 offset

All other receivers

<±35 mV with input at 0 offset

Skew compensation

62 ns

Maximum resolution

MTP 1500RL 15HD A SEQ

Up to 1600x1200 and 1080p at 1500'
Up to 1920x1200 and 2048x1080 at 1200'

All other models

Up to 1920x1200 or 2048x1080 or 1080p at 300'
Up to 1024x768 at 600'

NOTE	See the user guide for the maximum distances recommended for specific resolutions.

Sync

Input type (transmitters)

RGBHV, RGBS, RGsB, RsGsBs

Output type (receivers)

RGBHV, RGBS, RGsB, RsGsBs

Standards

NTSC 3.58, NTSC 4.43, PAL, SECAM

Input level (transmitter)

3.5 V to 5.5 Vp-p, unterminated

Output level (receivers)

4.0 V to 5.0 Vp-p, unterminated

Input impedance (transmitter)

573 ohms ±5%

Output impedance (receivers)

MTP C7 15HD models

92 ohms ±8% (25 mA)

All other models

110 ohms

Polarity

Transmitter

Positive or negative (follows input polarity)

Receivers

Positive or negative (switch-selectable)

Audio — all models

Number/signal type

1 set of proprietary analog signals

Connectors

1 female RJ-45

Gain

Unbalanced output: 0 dB; balanced output: +6 dB

Frequency response

20 Hz to 20 kHz, ±1 dB

THD + Noise

0.15% @ 1 kHz, 0.3% @ 20 kHz at nominal level

S/N

>70 dB at maximum output (unweighted)

Stereo channel separation

>60 dB @ 1 kHz

CMRR

>43 dB @ 20 Hz to 20 kHz

Audio input — transmitters

Number/signal type

1 stereo, unbalanced

Connectors

(1) 3.5 mm mini stereo jack

Impedance

>10k ohms, unbalanced

Nominal level

+4 dBu (1.23 Vrms), -10 dBV
(316 mVrms)

Maximum level

MTP C7 15HD models

+12 dBu, (unbalanced) at 1%THD+N

All other models

+18 dBu, (unbalanced) at 1%THD+N

NOTE	0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu

Audio output — MTP T 15HD A AAP, MTP T 15HD A D, MTP T 15HD A WM local stereo output

Number/signal type

1 stereo, balanced/unbalanced

Connectors

(1) 3.5 mm direct insertion captive screw connector, 5 pole

Impedance

50 ohms unbalanced, 100 ohms balanced

Gain error

±1 dB channel to channel

Maximum level (Hi-Z)

>+23 dBu, balanced or unbalanced at 1% THD+N

Maximum level (600 ohm)

>+17 dBm, balanced or unbalanced at 1% THD+N

Audio output — receivers

Number/signal type

MTP R 15HD RSA D

1 mono, balanced/unbalanced

All other receivers

2 mono, balanced/unbalanced

Connectors

MTP R 15HD RSA D

(1) 3.5 mm captive screw connector, 5 pole (uses 3 poles)

All other receivers

(1) 3.5 mm captive screw connector, 5 pole

Impedance

50 ohms unbalanced, 100 ohms balanced

Gain error

±1 dB channel to channel

Nominal level

+4 dBu (1.23 Vrms), -10 dBV (316 mVrms)

Maximum level

MTP R 15HD RSA D

14 dBm, unbalanced at 1% THD+N

All other receivers

+18 dBu, unbalanced at 1% THD+N

Control/remote — external device (pass-through, unidirectional or bidirectional) — MTP R 15HD RSA D only

Serial control port input/output

1 set of proprietary signals on a female RJ-45 jack

Serial control port output/input

RS-232 via 3 poles of a 3.5 mm captive screw connector, 5 pole

Baud rates

Up to 38400 bps at up to 600' (182.9 m) (Higher data rates and distances are possible. Performance varies based on baud rate and cable length.)

Protocol

Data bits = 5 - 8
Stop bits = 1 or 2
Parity = odd, even, none
Flow control = XON, XOFF, none

NOTE	Protocol is mirrored between the transmitter and the receiver.

Serial control pin configuration

Captive screw connector: 1 = Tx, 2 = Rx,
3 = GND

General

Recommended cable type

Models other than C7 models

CAT 5/5e/6 (shielded or unshielded)

Required cable type

MTP C7 15HD models

Extron STP201 or CAT 7

Power supply

External
Input: 100-240 VAC, 50-60 Hz
Output: 12 VDC, 1 A, 12 watts

Power input requirements

MTP 1500RL 15HD A SEQ

12 VDC, 1 A

All other models

12 VDC, 0.5 A

Ambient temperature/humidity

Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing

Cooling

MTP 1500RL 15HD A SEQ

Convection, vents sides to top

All other models

Convection, no vents

Mounting

Rack mount

MTP T 15HD A, MTP RL 15HD A, MTP RL 15HD A SEQ, MTP 1500RL 15HD A SEQ

Yes, with optional 1U rack shelf

Furniture or wall mount

MTP T 15HD A, MTP RL 15HD A, MTP RL 15HD A SEQ

Yes, with optional under-desk mounting kit

MTP T 15HD A AAP

Yes, with optional AAP mounting faceplates that have double space high AAP opening

MTP T 15HD A D, MTP R 15HD RSA D

Yes, in a decorator-style opening with a standard electrical wall box or decorator-style size mud ring

MTP T 15HD A WM

Yes, in a 1-gang opening

Wall mount

MTP 1500RL 15HD models

Yes, with optional wall mounting kit

Pole mount

MTP T 15HD A, MTP RL 15HD A, MTP RL 15HD A SEQ

Yes, with optional pole mounting kit

Enclosure type

Metal

Enclosure dimensions

MTP T 15HD A, MTP RL 15HD A, MTP RL 15HD A SEQ

1.7" H x 4.3" W x 3.0" D (1U high, quarter rack wide)
4.3 cm H x 10.9 cm W x 7.6 cm D
(Depth excludes connectors.)

MTP C7 15HD models

1.7" H x 4.3" W x 3.0" D (1U high, quarter rack wide)
(4.3 cm H x 10.9 cm W x 7.6 cm D)
(Depth excludes connectors and knobs.)

MTP 1500RL 15HD SEQ models

1.0" H x 8.75" W x 6.0" D (half rack wide)
(2.5 cm H x 22.2 cm W x 15.2 cm D)
(Depth excludes connectors.)

Faceplates

MTP T 15HD A AAP

1.4" H x 3.5" W x 0.1" D (3.6 cm H x 8.9 cm W x 0.3 cm D)
(double space high AAP plate)

MTP T 15HD A D, MTP R 15HD RSA D

2.6" H* x 1.3" W x 0.1" D (6.6 cm H* x 3.3 cm W x 0.3 cm D)
(Fits the opening in a 1 gang, 4.4" H x 2.7" W
decorator-style wallplate. Depth excludes connectors.)
*Overall height is 4.1" (10.4 cm) including mounting tabs.

MTP T 15HD A WM

4.5" H x 2.8" W x 0.1" D
(11.4 cm H x 7.1 cm W x 0.3 cm D)
(1 gang)

Device

MTP R 15HD RSA D

2.75" H x 1.65" W x 1.3" D
(7.0 cm H x 4.2 cm W x 3.3 cm D)
(Depth excludes connectors.)

Other AAP, D, and WM models

2.7" H x 1.4" W x 1.4" D
(6.9 cm H x 3.6 cm W x 3.6 cm D)
(Depth excludes connectors.)

Product weight

MTP 1500RL 15HD A SEQ

1 lb (0.5 kg)

All other models

0.4 lbs (0.2 kg)

Vibration

ISTA 1A in carton (International Safe Transit Association)

Regulatory compliance

Safety

CE, c-UL, UL

EMI/EMC

CE, C-tick, FCC Class A, ICES, VCCI

Product warranty

3 years parts and labor

Everlast power supply warranty

7 years parts and labor

NOTE	All nominal levels are at ±10%.

NOTE	Specifications are subject to change without notice.

(CMS-041917-D18)

MTP T 15HD A Retired

Features

Specifications

Diagram

Panel Drawing